103 Highlights 76 Differences 0 Reactions 0 Likes

Makita LS1016L Facts: 142 Specifications & 103 Highlights

An honest comparison to help you decide which specs really matter for smart buying.
Not all miter saws are built alike. We dug into the Makita LS1016L and pulled out 142 specs & features — like motor power, no load speed, blade speed & width — that show what it’s really about.

Supermod

Andhi E.

374 Products

Moderator

Bintang P. A.

238 Products

56 Points

Makita

Makita LS1016L

Highlights ¹⁰³

No extras. Just what matters.

                                
                                                    56
                                                
                                                    Points
                                                
                                        Makita LS1016L

Why is Makita LS1016L better than other miter saws ?

General Information Motor & Power Blade & Cutting System Cutting Accuracy & Adjustability Build Material & Durability Dimensions & Weight Noise & Vibration Safety Features Maintenance & Serviceability Compatibility & Mounting Design & Ergonomics Packaging & Logistics

General Information

Suitable for DIY,Home Improvement,Professional Applications Describes the primary usage environment for the saw.
Certified Under UL,CSA,ETL Standards Indicates compliance with recognized safety and quality standards.
Miter Saw Category: Dual Bevel Defines the structural configuration and cutting capability class.
Powered by Corded Operation Specifies whether the saw operates via electrical cord or battery power.
Released in 2009 Shows the year the model was introduced to market.
Equipped with a Brushed Motor Indicates the motor technology used inside the saw.
Built for Medium Duty Performance Reflects the structural robustness level of the tool.
Manufactured in Japan Indicates the country where the saw is manufactured.
Ideal for Beginner Users Indicates the recommended operator experience level.

Scroll down for more facts

Motor & Power

379.02 Watt higher motor power Indicates the rated motor power output for cutting performance. 1,650.0 Watt vs 1,271.0 Watt
32.94 Volt higher motor voltage Specifies the operating voltage requirement. 120.0 Volt vs 87.1 Volt
Includes an Electric Brake for Fast Blade Stop Stops blade quickly after trigger release. with a difference of 70.0 points
1.22 lb-ft higher maximum output torque Measures peak torque output under load. 40.0 lb-ft vs 38.8 lb-ft
1.55 ft longer cord length Length of the power cord for mobility. 8.0 ft vs 6.4 ft
41.84 Watt lower power consumption Shows total electrical power usage during operation. 1,650.0 Watt vs 1,691.8 Watt
0.87 Hz higher motor frequency Defines the AC power frequency compatibility. 60.0 Hz vs 59.1 Hz
Features Soft Start for Smoother Startup Gradually increases motor speed to reduce startup shock. with a difference of 70.0 points
Drive Type: Direct Drive Defines how power transfers from motor to blade.
Includes Thermal Overload Protection Protects motor from overheating damage. with a difference of 69.0 points
Features Power Indicator Light Visual indicator showing power status. with a difference of 71.0 points

Scroll down for more facts

Blade & Cutting System

Compatible with Wood,Hardwood,Softwood,Plywood Cutting Applications Lists the materials that can be safely cut with compatible blades.
0.43 inch larger blade diameter Indicates the blade size supported by the saw. Larger blades increase cutting capacity. 10.0 inch vs 9.6 inch
3.92 inch larger arbor size Specifies the arbor hole diameter required for blade mounting. 5.0 inch vs 1.1 inch
2.77 inch larger maximum crosscut capacity Represents the maximum crosscut cutting capacity across supported angles. 12.0 inch vs 9.2 inch
0.99 inch larger maximum crown molding capacity Defines the maximum crown molding size that can be cut. 6.0 inch vs 5.0 inch
1.37 inch larger maximum nested crown capacity Defines maximum crown molding size when cut nested. 6.0 inch vs 4.6 inch
1.94 inch larger maximum vertical cut capacity Indicates maximum vertical cutting height supported. 6.0 inch vs 4.1 inch
1.39 inch larger maximum baseboard capacity Indicates the maximum baseboard height supported vertically. 6.0 inch vs 4.6 inch
Bevel Direction: Dual Bevel Indicates whether bevel cuts are supported on one or both sides.
0.53 degree wider maximum bevel angle left Specifies maximum left bevel angle range. 45.0 degree vs 44.5 degree
0.55 degree wider maximum bevel angle right Specifies maximum right bevel angle range. 45.0 degree vs 44.4 degree
2.11 degree wider maximum miter angle left Indicates maximum left miter rotation range. 50.0 degree vs 47.9 degree
1.45 degree wider maximum miter angle right Indicates maximum right miter rotation range. 50.0 degree vs 48.5 degree
Includes 6-10 Preset Miter Stops Specifies the number of preset miter stops for quick angle adjustments.
Offers 6-10 Bevel Stops Indicates the number of preset bevel stops for precision.
Equipped with Single Line Guide System Indicates type of cutline guidance system.
Comes with Blade Indicates whether a blade is included in the package. with a difference of 69.0 points
Blade Change System: Tool Required Describes blade replacement method.
0.27 inch larger sliding cut capacity Indicates additional cutting width enabled by sliding rails. 12.0 inch vs 11.7 inch

Scroll down for more facts

Cutting Accuracy & Adjustability

Miter Detent Plate Type: Stainless Steel Describes the construction and adjustability of the miter detent system.
Fence Type: Standard Fence Defines the fence configuration supporting workpieces.
0.66 inch higher fence height Specifies vertical support height of the fence. 4.0 inch vs 3.3 inch
Bevel Adjustment Type: Rear Knob Indicates how bevel angle adjustments are controlled.
Includes Sliding Rail System Indicates whether the saw uses sliding rails for extended cuts. with a difference of 71.0 points
Rail Orientation: Rear Rail Describes the direction or mechanism of rail movement.
Angle Lock System: Cam Lock Defines the locking mechanism securing angle settings.
Includes Crown Molding Stop System Indicates whether crown molding stops are included for repeatability. with a difference of 71.0 points
Includes Work Clamp For Secure Cutting Indicates whether a work clamp is provided. with a difference of 69.0 points
Equipped With Adjustable Depth Stop Allows controlled trenching and repeated depth cuts. with a difference of 69.0 points
Offers Dual Bevel Functionality Indicates ability to bevel in both directions without flipping material. with a difference of 71.0 points

Scroll down for more facts

Build Material & Durability

Table Material: Cast Aluminum Specifies the material of the cutting table surface.
Blade Guard Material: Polycarbonate Defines material used for blade protection guard.
Base Material: Cast Aluminum Defines the structural material of the saw base for stability.
Fence Material: Aluminum Indicates material composition of the fence system.
Handle Material: Rubber Overmold Indicates ergonomic handle material composition.
Gear Housing Material: Metal Specifies housing material protecting internal gears.
Dust Port Material: Plastic Indicates construction material of the dust port.
Features Corrosion Resistant Coating Indicates presence of anti-corrosion surface treatment. with a difference of 70.0 points
Built With Reinforced Arm Construction Shows whether the cutting arm includes structural reinforcement. with a difference of 70.0 points
Built With Impact Resistant Components Indicates resistance to accidental drops and impacts. with a difference of 70.0 points
Equipped With Sealed Bearings Protects internal bearings from dust and debris. with a difference of 70.0 points
Rated For Heavy Duty Performance Indicates suitability for prolonged heavy workload use. with a difference of 71.0 points
Features Metal Gear Construction Indicates internal gears are made of metal for durability. with a difference of 69.0 points
Built With Reinforced Pivot Mechanism Strengthens pivot points to maintain alignment over time. with a difference of 69.0 points

Scroll down for more facts

Dimensions & Weight

5.88 inch narrower width Overall operational width of the saw. 18.0 inch vs 23.9 inch
3.53 inch shorter height Overall operational height of the unit. 15.0 inch vs 18.5 inch
3.45 inch narrower package width Width of retail packaging box. 20.0 inch vs 23.4 inch
1.56 inch narrower base footprint width Width of base contact area for stability and mounting. 18.0 inch vs 19.6 inch

Scroll down for more facts

Noise & Vibration

9.56 dB lower noise level Indicates operational sound output during cutting. 85.0 dB vs 94.6 dB
Includes Smooth Startup Control Reduces startup vibration and torque shock. with a difference of 71.0 points
Features Anti-Vibration Handle Design Indicates whether the handle includes vibration dampening design. with a difference of 69.0 points
Equipped With Rubberized Stabilizing Feet Helps stabilize the saw and reduce vibration transfer. with a difference of 70.0 points

Scroll down for more facts

Safety Features

2.36 % higher dust collection efficiency Represents effectiveness of dust extraction during operation. 70.0 % vs 67.6 %
Blade Guard Type: Retractable Defines the protective guard system covering the blade.
Includes Dust Collection Port Indicates presence of port for dust extraction system. with a difference of 69.0 points
Equipped With Protective Eye Shield Provides additional eye safety barrier. with a difference of 70.0 points
Meets OSHA Compliance Standards Indicates compliance with OSHA safety regulations. with a difference of 69.0 points
Includes Safety Trigger Lock Prevents accidental startup by locking trigger activation. with a difference of 69.0 points
Equipped With Spindle Lock Allows safe and easy blade replacement by locking spindle rotation. with a difference of 69.0 points
Equipped With Overheat Protection Automatically shuts off motor if overheating occurs. with a difference of 69.0 points
UL Listed Certified Indicates certification under UL safety testing standards. with a difference of 69.0 points

Scroll down for more facts

Maintenance & Serviceability

Brush Access Design: External Access Describes how carbon brushes can be accessed for maintenance.
Covered by On Site Warranty Service Describes how warranty repairs are handled.
Minimal Lubrication Required Indicates whether periodic lubrication is required. with a difference of 69.0 points
Carbon Brushes Are Replaceable Indicates if carbon brushes can be replaced when worn. with a difference of 70.0 points
Replacement Parts Readily Available Indicates whether official replacement parts are widely available. with a difference of 69.0 points

Scroll down for more facts

Compatibility & Mounting

Designed for Table Mounting Indicates whether the saw can be mounted directly to a worktable. with a difference of 69.0 points
Compatible Blade Types: Crosscut,Combination,Finishing,Fine Tooth Lists blade types supported by the saw.
Compatible With Miter Saw Stands Indicates whether the saw is compatible with external miter saw stands. with a difference of 69.0 points
Mounting Hole Pattern: 4-Hole Describes the pattern of mounting holes for securing the saw to a stand or surface.
Includes Vacuum Adapter Indicates whether a vacuum adapter is included for dust extraction. with a difference of 69.0 points
Suitable for Bench Mounting Indicates whether the saw can be securely mounted to a bench. with a difference of 69.0 points
Compatible With Mobile Carts Indicates compatibility with mobile tool carts for transport. with a difference of 69.0 points

Scroll down for more facts

Design & Ergonomics

Handle Orientation: Horizontal Defines the orientation style of the operating handle.
Grip Type: Rubber Overmold Indicates the grip surface design for user comfort.
Includes Integrated Carrying Handle Indicates presence of integrated carry handle for transport. with a difference of 69.0 points
Designed With Compact Footprint Indicates whether the saw is engineered for space efficiency. with a difference of 70.0 points
Incorporates Space-Saving Design Indicates features that reduce rear clearance or storage space. with a difference of 69.0 points
Finished in Blue Color Describes exterior color and finish style.
Control Placement: Front Mounted Indicates location of main adjustment controls.
Display Type: Analog Scale Indicates type of measurement or angle display interface.

Scroll down for more facts

Packaging & Logistics

Includes User Manual Indicates whether an instruction manual is included. with a difference of 69.0 points
Assembly Tools Included Indicates whether required assembly tools are provided. with a difference of 69.0 points

Scroll down for more facts

Comparisons ¹

Make your choice now!

Makita LS1016L vs LS1019L

Quick Take

The essentials that matter—nothing extra

A fast snapshot of the Makita LS1016L, covering its standout specification and what you can expect right out of the box.

Makita LS1016L

The Makita LS1016L is a 10-inch dual sliding miter saw known for its smooth operation and accuracy. It features a robust rail system and a laser guide for improved cutting precision. This model is a strong choice for both woodworking projects and detailed trim work.

Quick Specs Breakdown

The key specs that actually matter—no fluff, no guesswork

Here’s a streamlined view of the Makita LS1016L key specifications. Compare critical features at a glance before exploring the full specs and hands-on insights below.

Motor & Power

Motor Power

What is the motor power?

1650 Watt

No Load Speed

What is the no-load speed?

3200 RPM

Blade & Cutting System

Blade Speed

What is the blade speed?

3200 RPM

Blade Material Compatibility

What materials can it cut?

Wood,Hardwood,Softwood,Plywood

Dimensions & Weight

Width

What is the overall width?

18 inch

Depth

What is the overall depth?

24 inch

Height

What is the overall height?

15 inch

Noise & Vibration

Noise Level

What is the noise level?

85 dB

Vibration Level

What is the vibration level?

5 mm/s

Safety Features

Dust Collection Efficiency

What is the dust collection efficiency?

70 %

Blade Guard Type

What type of blade guard does it use?

Retractable

Compatibility & Mounting

Table Mountable

Can it be table mounted?

Yes

Compatible Blade Types

What blade types are compatible?

Crosscut,Combination,Finishing,Fine Tooth

Packaging & Logistics

User Manual

Is a user manual included?

Yes

Retail Packaging Type

What type of retail packaging is used?

Boxed

General Information

Intended Use

What is the intended use?

DIY,Home Improvement,Professional

Certification Standards

What certifications does it have?

UL,CSA,ETL

Cutting Accuracy & Adjustability

Miter Detent Plate Type

What type of miter detent plate is used?

Stainless Steel

Fence Type

What type of fence does it use?

Standard Fence

Build Material & Durability

Table Material

What is the table material?

Cast Aluminum

Blade Guard Material

What is the blade guard material?

Polycarbonate

Maintenance & Serviceability

Brush Access Design

What type of brush access design does it use?

External Access

Warranty Service Type

What type of warranty service is provided?

On Site

Design & Ergonomics

Handle Orientation

What is the handle orientation?

Horizontal

Grip Type

What type of grip does it use?

Rubber Overmold

Specifications & Facts ¹⁴²

Specs measured. Drama avoided.

Not just numbers on a box. We looked at how the Makita LS1016L actually performs with specs like motor power, no load speed, blade speed & width and others that users rely on daily.

General Information ¹⁰

Curated by Bintang P. A.

Makita LS1016L Intended Use

What is the intended use?

46 Makita LS1016L 0 Votes DIY, Home Improvement, Professional

4 Miter Saws in this range Professional

Describes the primary usage environment for the saw.

Curated by Bintang P. A.

Makita LS1016L Certification Standards

What certifications does it have?

51 Makita LS1016L 0 Votes UL, CSA, ETL

4 Miter Saws in this range UL, CSA

Indicates compliance with recognized safety and quality standards.

Makita LS1016L Miter Saw Category

What category of miter saw is this?

64 Makita LS1016L 0 Votes Dual Bevel

7 Miter Saws in this range Sliding Compound

Defines the structural configuration and cutting capability class.

Makita LS1016L Power Source Type

What is the power source type?

39 Makita LS1016L 0 Votes Corded

5 Miter Saws in this range Corded

Specifies whether the saw operates via electrical cord or battery power.

Makita LS1016L Release Year

What year was it released?

9 Makita LS1016L 0 Votes 2009

3 Miter Saws in this range 2020

Shows the year the model was introduced to market.

Makita LS1016L Motor Type

What type of motor does it use?

39 Makita LS1016L 0 Votes Brushed

5 Miter Saws in this range Brushless

Indicates the motor technology used inside the saw.

Makita LS1016L Construction Class

What is the construction class?

49 Makita LS1016L 0 Votes Medium Duty

3 Miter Saws in this range Heavy Duty

Reflects the structural robustness level of the tool.

Makita LS1016L Country of Manufacture

Where is it manufactured?

59 Makita LS1016L 0 Votes Japan

4 Miter Saws in this range China

Indicates the country where the saw is manufactured.

Makita LS1016L Warranty Length

What is the warranty length?

0 Makita LS1016L 0 Votes 1 Year

4 Miter Saws in this range 3 Years

Specifies the manufacturer warranty coverage period.

Makita LS1016L User Skill Level

What skill level is this suitable for?

9 Makita LS1016L 0 Votes Beginner

4 Miter Saws in this range Professional

Indicates the recommended operator experience level.

Motor & Power ¹⁸

Curated by Bintang P. A.

Makita LS1016L Motor Power

What is the motor power?

1,650 Watt 0 Votes

1,270.98 Watt (Average)

Makita LS1016L

Motor power is 1650 Watt, reflecting the continuous electrical power available to the motor for cutting tasks and informing electrical planning.

Indicates the rated motor power output for cutting performance.

Curated by Bintang P. A.

Makita LS1016L No Load Speed

What is the no-load speed?

3,200 RPM 0 Votes

4,416.04 RPM (Average)

Makita LS1016L

No-load speed is 3200 RPM, which affects blade tip speed and influences cut finish and material removal rate.

Indicates blade rotation speed without load.

Makita LS1016L Motor Voltage

What voltage does it operate on?

120 Volt 0 Votes

87.06 Volt (Average)

Makita LS1016L

Motor voltage is 120 Volt, the standard single-phase supply used at many North American job sites.

Specifies the operating voltage requirement.

Makita LS1016L Motor Amperage

What is the motor amperage?

13 Amp 0 Votes

15.6 Amp (Average)

Makita LS1016L

Rated motor amperage is 13 Amp, which indicates the electrical current draw and helps size appropriate circuit breakers or extension runs.

Shows the current draw under rated load.

Makita LS1016L Electric Brake

Does it have an electric brake?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

Includes an electric brake to stop the blade quickly after you release the trigger, improving operator safety and reducing wait time between cuts.

Stops blade quickly after trigger release.

Makita LS1016L Maximum Output Torque

What is the maximum output torque?

40 lb-ft 0 Votes

38.78 lb-ft (Average)

Makita LS1016L

Maximum output torque is 40 lb-ft, which corresponds to 54.23 N·m; higher torque helps maintain blade speed under heavy cutting loads.

Measures peak torque output under load.

Makita LS1016L Cord Length

What is the cord length?

8 ft 0 Votes

6.45 ft (Average)

Makita LS1016L

Cord length is 8 ft, which converts to 2.44 m; plan for extensions if your jobsite outlets are distant from the saw location.

Length of the power cord for mobility.

Makita LS1016L Recommended Generator Size

What generator size is recommended?

2,000 Watt 0 Votes

2,160.71 Watt (Average)

Makita LS1016L

Recommended generator size is 2000 Watt to reliably power the saw and handle startup draw without frequent trips.

Minimum generator output recommended for safe operation.

Makita LS1016L Power Consumption

What is the power consumption?

1,650 Watt 0 Votes

1,691.84 Watt (Average)

Makita LS1016L

Power consumption is 1650 W, indicating typical electrical load during operation and useful for circuit planning.

Shows total electrical power usage during operation.

Makita LS1016L Peak Horsepower

What is the peak horsepower?

2.3 HP 0 Votes

2.66 HP (Average)

Makita LS1016L

Peak horsepower is 2.3 HP, approximately 1.72 kW, providing a sense of peak motor capability under load.

Indicates peak horsepower rating of the motor.

Makita LS1016L Motor Frequency

What is the motor frequency?

60 Hz 0 Votes

59.13 Hz (Average)

Defines the AC power frequency compatibility.

Makita LS1016L Soft Start

Does it feature soft start?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Gradually increases motor speed to reduce startup shock.

Makita LS1016L Drive Type

What type of drive system is used?

79 Makita LS1016L 0 Votes Direct Drive

6 Miter Saws in this range Direct Drive

Defines how power transfers from motor to blade.

Makita LS1016L Battery

Is a battery included?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether a battery is included (cordless models).

Makita LS1016L Charger

Is a charger included?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether a charger is included.

Makita LS1016L Thermal Overload Protection

Does it have thermal overload protection?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Protects motor from overheating damage.

Makita LS1016L Power Indicator Light

Does it have a power indicator light?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Visual indicator showing power status.

Makita LS1016L Restart Protection

Does it have restart protection?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Prevents automatic restart after power interruption.

Blade & Cutting System ²¹

Curated by Bintang P. A.

Makita LS1016L Blade Speed

What is the blade speed?

3,200 RPM 0 Votes

4,446.23 RPM (Average)

Makita LS1016L

Blade speed is 3200 RPM, consistent with the no-load speed rating and a key factor in cut quality and material handling.

Indicates the rotational speed of the blade during operation.

Curated by Bintang P. A.

Makita LS1016L Blade Material Compatibility

What materials can it cut?

38 Makita LS1016L 0 Votes Wood, Hardwood, Softwood, Plywood

4 Miter Saws in this range Wood, Hardwood, Softwood, Plywood, MDF, Plastic, Aluminum

Lists the materials that can be safely cut with compatible blades.

Makita LS1016L Blade Diameter

What is the blade diameter?

10 inch 0 Votes

9.57 inch (Average)

Makita LS1016L

Blade diameter is 10 inch, or 25.4 cm, a common size that determines maximum cutting depth and available blade options.

Indicates the blade size supported by the saw. Larger blades increase cutting capacity.

Makita LS1016L Arbor Size

What is the arbor size?

5 inch 0 Votes

1.08 inch (Average)

Makita LS1016L

Arbor size is 5 inch, which converts to 12.7 cm. The arbor diameter determines which blade hub sizes will fit this saw.

Specifies the arbor hole diameter required for blade mounting.

Makita LS1016L Maximum Crosscut Capacity

What is the maximum crosscut capacity?

12 inch 0 Votes

9.23 inch (Average)

Makita LS1016L

Maximum crosscut capacity is 12 inch, which converts to 30.48 cm, and defines the widest board you can cut in a single pass.

Represents the maximum crosscut cutting capacity across supported angles.

Makita LS1016L Maximum Crown Molding Capacity

What is the crown molding capacity?

6 inch 0 Votes

5.01 inch (Average)

Makita LS1016L

Maximum crown molding capacity is 6 inch, equivalent to 15.24 cm, which covers most standard crown profiles when cut nested or flat.

Defines the maximum crown molding size that can be cut.

Makita LS1016L Maximum Nested Crown Capacity

What is the maximum nested crown capacity?

6 inch 0 Votes

4.63 inch (Average)

Makita LS1016L

Maximum nested crown capacity is 6 inch, equal to 15.24 cm, indicating the largest crown profile that can be cut nested on the fence.

Defines maximum crown molding size when cut nested.

Makita LS1016L Maximum Vertical Cut Capacity

What is the maximum vertical cut capacity?

6 inch 0 Votes

4.06 inch (Average)

Indicates maximum vertical cutting height supported.

Makita LS1016L Maximum Baseboard Capacity

What is the baseboard capacity?

6 inch 0 Votes

4.61 inch (Average)

Indicates the maximum baseboard height supported vertically.

Makita LS1016L Bevel Direction

What is the bevel direction capability?

89 Makita LS1016L 0 Votes Dual Bevel

5 Miter Saws in this range Dual Bevel

Indicates whether bevel cuts are supported on one or both sides.

Makita LS1016L Maximum Bevel Angle Left

What is the maximum left bevel angle?

45 degree 0 Votes

44.47 degree (Average)

Specifies maximum left bevel angle range.

Makita LS1016L Maximum Bevel Angle Right

What is the maximum right bevel angle?

45 degree 0 Votes

44.45 degree (Average)

Specifies maximum right bevel angle range.

Makita LS1016L Maximum Miter Angle Left

What is the maximum left miter angle?

50 degree 0 Votes

47.89 degree (Average)

Indicates maximum left miter rotation range.

Makita LS1016L Maximum Miter Angle Right

What is the maximum right miter angle?

50 degree 0 Votes

48.55 degree (Average)

Indicates maximum right miter rotation range.

Makita LS1016L Positive Miter Stops Count

How many positive miter stops are available?

54 Makita LS1016L 0 Votes 6-10

5 Miter Saws in this range 6-10

Specifies the number of preset miter stops for quick angle adjustments.

Makita LS1016L Bevel Stops Count

How many bevel stops are available?

59 Makita LS1016L 0 Votes 6-10

2 Miter Saws in this range 0-5

Indicates the number of preset bevel stops for precision.

Makita LS1016L Laser Guide Type

What type of laser guide does it use?

39 Makita LS1016L 0 Votes Single Line

2 Miter Saws in this range Single Line

Indicates type of cutline guidance system.

Makita LS1016L LED Cutline Light

Does it include LED cutline light?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Illuminates cutting area for improved visibility.

Makita LS1016L Blade

Is a blade included?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether a blade is included in the package.

Makita LS1016L Blade Change System

What type of blade change system is used?

19 Makita LS1016L 0 Votes Tool Required

2 Miter Saws in this range Tool Required

Describes blade replacement method.

Makita LS1016L Sliding Cut Capacity

What is the sliding cut capacity?

12 inch 0 Votes

11.73 inch (Average)

Indicates additional cutting width enabled by sliding rails.

Cutting Accuracy & Adjustability ¹⁶

Curated by Bintang P. A.

Makita LS1016L Miter Detent Plate Type

What type of miter detent plate is used?

39 Makita LS1016L 0 Votes Stainless Steel

3 Miter Saws in this range Stainless Steel

Describes the construction and adjustability of the miter detent system.

Curated by Bintang P. A.

Makita LS1016L Fence Type

What type of fence does it use?

19 Makita LS1016L 0 Votes Standard Fence

2 Miter Saws in this range Standard Fence

Defines the fence configuration supporting workpieces.

Makita LS1016L Fence Height

What is the fence height?

4 inch 0 Votes

3.34 inch (Average)

Makita LS1016L

Fence height is 4 inch, which equals 10.16 cm, providing vertical support for edge alignment on typical workpieces.

Specifies vertical support height of the fence.

Makita LS1016L Bevel Adjustment Type

What type of bevel adjustment does it have?

69 Makita LS1016L 0 Votes Rear Knob

5 Miter Saws in this range Front Knob

Indicates how bevel angle adjustments are controlled.

Makita LS1016L Sliding Rail System

Does it have a sliding rail system?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether the saw uses sliding rails for extended cuts.

Makita LS1016L Rail Orientation

What is the rail orientation?

19 Makita LS1016L 0 Votes Rear Rail

2 Miter Saws in this range Rear Rail

Describes the direction or mechanism of rail movement.

Makita LS1016L Micro Bevel Adjustment

Does it support micro bevel adjustment?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Allows fine incremental bevel angle tuning.

Makita LS1016L Angle Lock System

What type of angle lock system is used?

59 Makita LS1016L 0 Votes Cam Lock

5 Miter Saws in this range Cam Lock

Defines the locking mechanism securing angle settings.

Makita LS1016L Table Extension Wings

Does it include table extension wings?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates presence of side extensions for longer materials.

Makita LS1016L Crown Molding Stop

Does it include crown molding stops?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether crown molding stops are included for repeatability.

Makita LS1016L Work Clamp

Is a work clamp included?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether a work clamp is provided.

Makita LS1016L Depth Stop

Does it have a depth stop?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Allows controlled trenching and repeated depth cuts.

Makita LS1016L Trenching Capability

Does it support trenching capability?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates ability to perform trench or dado-style cuts.

Makita LS1016L Calibration Adjustment Access

Can it be recalibrated easily?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether users can recalibrate angles when needed.

Makita LS1016L Fine Miter Adjustment

Does it support fine miter adjustment?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Enables precise incremental miter tuning.

Makita LS1016L Dual Bevel Capability

Does it have dual bevel capability?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates ability to bevel in both directions without flipping material.

Build Material & Durability ¹⁶

Curated by Bintang P. A.

Makita LS1016L Table Material

What is the table material?

69 Makita LS1016L 0 Votes Cast Aluminum

5 Miter Saws in this range Cast Aluminum

Specifies the material of the cutting table surface.

Curated by Bintang P. A.

Makita LS1016L Blade Guard Material

What is the blade guard material?

69 Makita LS1016L 0 Votes Polycarbonate

5 Miter Saws in this range Polycarbonate

Defines material used for blade protection guard.

Makita LS1016L Base Material

What is the base material?

49 Makita LS1016L 0 Votes Cast Aluminum

4 Miter Saws in this range Cast Aluminum

Defines the structural material of the saw base for stability.

Makita LS1016L Fence Material

What is the fence material?

49 Makita LS1016L 0 Votes Aluminum

4 Miter Saws in this range Aluminum

Indicates material composition of the fence system.

Makita LS1016L Handle Material

What is the handle material?

89 Makita LS1016L 0 Votes Rubber Overmold

7 Miter Saws in this range Rubber Overmold

Indicates ergonomic handle material composition.

Makita LS1016L Gear Housing Material

What is the gear housing material?

29 Makita LS1016L 0 Votes Metal

3 Miter Saws in this range Metal

Specifies housing material protecting internal gears.

Makita LS1016L Dust Port Material

What is the dust port material?

39 Makita LS1016L 0 Votes Plastic

3 Miter Saws in this range Plastic

Indicates construction material of the dust port.

Makita LS1016L Corrosion Resistant Coating

Does it have corrosion resistant coating?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates presence of anti-corrosion surface treatment.

Makita LS1016L Reinforced Arm Construction

Does it have reinforced arm construction?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Shows whether the cutting arm includes structural reinforcement.

Makita LS1016L Impact Resistant Components

Are components impact resistant?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates resistance to accidental drops and impacts.

Makita LS1016L Sealed Bearings

Does it use sealed bearings?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Protects internal bearings from dust and debris.

Makita LS1016L Heavy Duty Rating

Is it rated for heavy duty use?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates suitability for prolonged heavy workload use.

Makita LS1016L Weather Resistant

Is it weather resistant?

No 0 Votes ~~Makita LS1016L~~

Miter Saw in this range Who knows? (Help us out by suggesting one!)

Indicates resistance to moisture and outdoor conditions.

Makita LS1016L Industrial Grade Classification

Is it industrial grade?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Specifies whether it meets industrial-grade standards.

Makita LS1016L Metal Gear Construction

Does it have metal gear construction?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates internal gears are made of metal for durability.

Makita LS1016L Reinforced Pivot Mechanism

Does it have reinforced pivot mechanism?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Strengthens pivot points to maintain alignment over time.

Dimensions & Weight ¹⁰

Curated by Bintang P. A.

Makita LS1016L Width

What is the overall width?

18 inch 0 Votes

23.88 inch (Average)

Makita LS1016L

Unit width is 18 inch, which converts to 45.72 cm, useful when allocating bench or storage space.

Overall operational width of the saw.

Curated by Bintang P. A.

Makita LS1016L Depth

What is the overall depth?

24 inch 0 Votes

22.98 inch (Average)

Overall operational depth from front to back.

Curated by Bintang P. A.

Makita LS1016L Height

What is the overall height?

15 inch 0 Votes

18.53 inch (Average)

Overall operational height of the unit.

Makita LS1016L Package Depth

What is the package depth?

25 inch 0 Votes

21.59 inch (Average)

Makita LS1016L

Package depth is 25 inch, which converts to 63.5 cm; use this for storage planning and shipping footprint calculations.

Depth of retail packaging box.

Makita LS1016L Package Height

What is the package height?

18 inch 0 Votes

17.62 inch (Average)

Makita LS1016L

Package height is 18 inch, which is 45.72 cm, and should be considered for shipping and storage clearances.

Height of retail packaging box.

Makita LS1016L Shipping Weight

What is the shipping weight?

48 lbs 0 Votes

35.85 lbs (Average)

Makita LS1016L

Shipping weight is 48 lbs, equivalent to 21.77 kg, and is useful for estimating freight costs and handling requirements.

Total shipping weight including packaging.

Makita LS1016L Table Height

What is the table height?

5 inch 0 Votes

6.64 inch (Average)

Makita LS1016L

Table height is 5 inch, equal to 12.7 cm, a dimension to consider when aligning the saw with a workbench or stand.

Height of the cutting table from base reference.

Makita LS1016L Package Width

What is the package width?

20 inch 0 Votes

23.45 inch (Average)

Width of retail packaging box.

Makita LS1016L Product Weight

What is the product weight?

45 lbs 0 Votes

33.57 lbs (Average)

Net weight of the saw without packaging.

Makita LS1016L Base Footprint Width

What is the base footprint width?

18 inch 0 Votes

19.56 inch (Average)

Width of base contact area for stability and mounting.

Noise & Vibration ⁸

Curated by Bintang P. A.

Makita LS1016L Noise Level

What is the noise level?

85 dB 0 Votes

94.56 dB (Average)

Makita LS1016L

Noise level is 85 dB during operation; hearing protection is recommended for extended use to prevent hearing damage.

Indicates operational sound output during cutting.

Curated by Bintang P. A.

Makita LS1016L Vibration Level

What is the vibration level?

5 mm/s 0 Votes

3.1 mm/s (Average)

Measures vibration intensity transmitted during operation.

Makita LS1016L Smooth Start Mechanism

Does it include smooth start mechanism?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

Equipped with a smooth-start mechanism that eases motor startup torque for reduced mechanical stress and a gentler initial acceleration.

Reduces startup vibration and torque shock.

Makita LS1016L Anti Vibration Handle

Does it have an anti-vibration handle?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether the handle includes vibration dampening design.

Makita LS1016L Rubberized Feet

Does it include rubberized feet?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Helps stabilize the saw and reduce vibration transfer.

Makita LS1016L Sound Dampening Design

Does it feature sound dampening design?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates built-in sound reduction construction elements.

Makita LS1016L Noise Reduction Technology

Does it include noise reduction technology?

No 0 Votes ~~Makita LS1016L~~

Miter Saw in this range Who knows? (Help us out by suggesting one!)

Indicates specialized engineering to reduce acoustic output.

Makita LS1016L Balanced Armature System

Does it use a balanced armature system?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Improves internal balance to reduce vibration during cutting.

Safety Features ¹³

Curated by Bintang P. A.

Makita LS1016L Dust Collection Efficiency

What is the dust collection efficiency?

70 % 0 Votes

67.64 % (Average)

Makita LS1016L

Dust collection efficiency is 70%, meaning the built-in collection captures the majority but not all airborne or fallen dust. Using an external vacuum can improve overall site cleanliness.

Represents effectiveness of dust extraction during operation.

Curated by Bintang P. A.

Makita LS1016L Blade Guard Type

What type of blade guard does it use?

69 Makita LS1016L 0 Votes Retractable

4 Miter Saws in this range Retractable

Defines the protective guard system covering the blade.

Makita LS1016L Dust Collection Port

Does it have a dust collection port?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

Includes a dust collection port to connect a shop vacuum or extractor, allowing for better dust control at the source.

Indicates presence of port for dust extraction system.

Makita LS1016L Eye Shield

Does it include an eye shield?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

An eye shield is provided to help protect the operator from chips and debris while maintaining visibility of the cut line.

Provides additional eye safety barrier.

Makita LS1016L OSHA Compliance

Is it OSHA compliant?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

Listed as compliant with OSHA-related requirements, which broadly relates to adherence to workplace safety standards and practices.

Indicates compliance with OSHA safety regulations.

Makita LS1016L Safety Trigger Lock

Does it have a safety trigger lock?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Prevents accidental startup by locking trigger activation.

Makita LS1016L Spindle Lock

Does it include a spindle lock?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Allows safe and easy blade replacement by locking spindle rotation.

Makita LS1016L Emergency Stop

Does it include an emergency stop?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Allows immediate shutdown in emergency situations.

Makita LS1016L Overheat Protection

Does it have overheat protection?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Automatically shuts off motor if overheating occurs.

Makita LS1016L Anti Restart Protection

Does it feature anti-restart protection?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Prevents automatic restart after power interruption.

Makita LS1016L UL Listed

Is it UL listed?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates certification under UL safety testing standards.

Makita LS1016L Spark Suppression System

Does it include spark suppression system?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Reduces spark generation during operation.

Makita LS1016L Two Stage Trigger

Does it use a two-stage trigger?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Requires dual-action trigger activation for added safety.

Maintenance & Serviceability ⁸

Curated by Bintang P. A.

Makita LS1016L Brush Access Design

What type of brush access design does it use?

89 Makita LS1016L 0 Votes External Access

6 Miter Saws in this range External Access

Describes how carbon brushes can be accessed for maintenance.

Curated by Bintang P. A.

Makita LS1016L Warranty Service Type

What type of warranty service is provided?

69 Makita LS1016L 0 Votes On Site

5 Miter Saws in this range Authorized Service Center

Describes how warranty repairs are handled.

Makita LS1016L Tool Free Adjustments

Does it support tool-free adjustments?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether adjustments can be made without additional tools.

Makita LS1016L Lubrication Required

Does it require lubrication?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether periodic lubrication is required.

Makita LS1016L Replaceable Carbon Brushes

Are the carbon brushes replaceable?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates if carbon brushes can be replaced when worn.

Makita LS1016L Replacement Parts Availability

Are replacement parts available?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether official replacement parts are widely available.

Makita LS1016L Cleaning Access Ports

Does it include cleaning access ports?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates access points for dust and debris cleaning.

Makita LS1016L Diagnostic Indicator

Does it include a diagnostic indicator?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates presence of system diagnostics or warning indicators.

Compatibility & Mounting ⁹

Curated by Bintang P. A.

Makita LS1016L Table Mountable

Can it be table mounted?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

Table-mountable design allows secure installation on compatible benches or work tables for fixed stationary use.

Indicates whether the saw can be mounted directly to a worktable.

Curated by Bintang P. A.

Makita LS1016L Compatible Blade Types

What blade types are compatible?

50 Makita LS1016L 0 Votes Crosscut, Combination, Finishing, Fine Tooth

4 Miter Saws in this range Crosscut, Combination, Finishing, Fine Tooth, Carbide Tipped

Lists blade types supported by the saw.

Makita LS1016L Stand Compatible

Is it stand compatible?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether the saw is compatible with external miter saw stands.

Makita LS1016L Stand

Is a stand included?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether a compatible stand is included in the package.

Makita LS1016L Mounting Hole Pattern

What is the mounting hole pattern?

39 Makita LS1016L 0 Votes 4-Hole

5 Miter Saws in this range Universal

Describes the pattern of mounting holes for securing the saw to a stand or surface.

Makita LS1016L Vacuum Adapter

Is a vacuum adapter included?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether a vacuum adapter is included for dust extraction.

Makita LS1016L Bench Mountable

Can it be bench mounted?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether the saw can be securely mounted to a bench.

Makita LS1016L Extension Support Compatibility

Is it compatible with extension supports?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates compatibility with external material support extensions.

Makita LS1016L Mobile Cart Compatible

Is it mobile cart compatible?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates compatibility with mobile tool carts for transport.

Design & Ergonomics ⁸

Curated by Bintang P. A.

Makita LS1016L Handle Orientation

What is the handle orientation?

29 Makita LS1016L 0 Votes Horizontal

3 Miter Saws in this range Horizontal

Defines the orientation style of the operating handle.

Curated by Bintang P. A.

Makita LS1016L Grip Type

What type of grip does it use?

79 Makita LS1016L 0 Votes Rubber Overmold

7 Miter Saws in this range Rubber Overmold

Indicates the grip surface design for user comfort.

Makita LS1016L Carrying Handle

Does it have a carrying handle?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates presence of integrated carry handle for transport.

Makita LS1016L Compact Design

Is it compact in design?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether the saw is engineered for space efficiency.

Makita LS1016L Space Saving Design

Does it feature space-saving design?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates features that reduce rear clearance or storage space.

Makita LS1016L Color Finish

What is the color finish?

29 Makita LS1016L 0 Votes Blue

6 Miter Saws in this range Green,Black

Describes exterior color and finish style.

Makita LS1016L Control Placement

Where are the controls placed?

39 Makita LS1016L 0 Votes Front Mounted

3 Miter Saws in this range Front Mounted

Indicates location of main adjustment controls.

Makita LS1016L Display Type

What type of display does it use?

29 Makita LS1016L 0 Votes Analog Scale

2 Miter Saws in this range Analog Scale

Indicates type of measurement or angle display interface.

Packaging & Logistics ⁵

Curated by Bintang P. A.

Makita LS1016L User Manual

Is a user manual included?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Makita LS1016L

A user manual is included, providing safety guidance, assembly instructions, and maintenance procedures for safe operation.

Indicates whether an instruction manual is included.

Curated by Bintang P. A.

Makita LS1016L Retail Packaging Type

What type of retail packaging is used?

0 Makita LS1016L 0 Votes Boxed

0 Miter Saws in this range Boxed

Describes the type of retail packaging used.

Makita LS1016L Assembly Required

Is assembly required?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether assembly is required before operation.

Makita LS1016L Assembly Tools

Are assembly tools included?

Yes 0 Votes Makita LS1016L

Yes Miter Saws in this range

Indicates whether required assembly tools are provided.

Makita LS1016L Stackable Packaging

Is the packaging stackable?

No 0 Votes ~~Makita LS1016L~~

Yes Miter Saws in this range

Indicates whether packaging is designed for safe stacking.

Surveys

Because hot takes deserve votes.

Makita LS1016L Cutting Performance

How would you rate the cutting performance of this miter saw?

Exceptional — Cuts through most materials easily, even thick woods and metals. 0 Votes

Great — Efficient and precise cuts on most materials. 0 Votes

Good — Acceptable cuts with occasional adjustments. 0 Votes

Fair — Struggles with tougher materials. 0 Votes

Poor — Requires a lot of effort for basic cuts. 0 Votes

Makita LS1016L Durability

How long-lasting is this miter saw in terms of overall durability?

Extremely durable — Lasts over 5 years with regular use. 0 Votes

Very durable — Lasts 3 to 5 years with regular use. 0 Votes

Moderately durable — Lasts 1 to 3 years with regular use. 0 Votes

Somewhat durable — Needs maintenance every year or so. 0 Votes

Not durable — Breaks down or wears out quickly. 0 Votes

Makita LS1016L Ease of Setup

How easy is it to set up this miter saw right out of the box?

Very easy — No tools or complex instructions required. 0 Votes

Easy — Quick setup with minimal effort. 0 Votes

Average — Takes some time but not too difficult. 0 Votes

Challenging — Requires significant effort and tools to assemble. 0 Votes

Very challenging — Setup is very complicated and time-consuming. 0 Votes

Makita LS1016L Noise Level

How would you rate the noise level of this miter saw while in use?

Quiet — Nearly silent, doesn't disrupt surroundings. 0 Votes

Low noise — Barely noticeable, won't disturb others. 0 Votes

Moderate noise — Noticeable but tolerable. 0 Votes

Loud — Disturbs surroundings and users. 0 Votes

Very loud — Unbearably noisy during operation. 0 Votes

Makita LS1016L Design & Build Quality

How would you rate the design and build quality of this miter saw?

Excellent — Very sturdy and sleek, high-quality materials used. 0 Votes

Good — Solid construction with minor imperfections. 0 Votes

Average — Functional design but feels basic. 0 Votes

Below average — Some parts feel cheap or flimsy. 0 Votes

Poor — Poor design, weak materials, and uncomfortable. 0 Votes

Makita LS1016L Safety Features

How safe is this miter saw during use?

Extremely safe — Multiple advanced safety features to prevent accidents. 0 Votes

Very safe — Includes essential safety features that work effectively. 0 Votes

Safe — Adequate safety features, but requires user attention. 0 Votes

Somewhat safe — Lacks some important safety features, needs caution. 0 Votes

Not safe — Missing critical safety features, prone to accidents. 0 Votes

Makita LS1016L Cutting Capacity

How would you rate the cutting capacity of this miter saw?

High capacity — Able to cut through large wood and thick materials with ease. 0 Votes

Good capacity — Sufficient for most regular tasks. 0 Votes

Average capacity — Can handle general cutting, but struggles with large materials. 0 Votes

Low capacity — Limited cutting options, only suitable for smaller tasks. 0 Votes

Very low capacity — Can barely handle basic cuts on softwoods. 0 Votes

Makita LS1016L Weight

How would you rate the weight of this miter saw for portability?

Very lightweight — Easy to move and carry with one hand. 0 Votes

Lightweight — Portable and manageable for most users. 0 Votes

Average weight — Heavy but still easy to move with effort. 0 Votes

Heavy — Requires two people for lifting and transport. 0 Votes

Very heavy — Difficult to move, requires a lot of effort. 0 Votes

Makita LS1016L Blade Adjustment

How would you rate the ease of blade adjustment on this miter saw?

Very easy — Quick, simple, and precise adjustments with no effort. 0 Votes

Easy — Straightforward adjustments that require minimal effort. 0 Votes

Average — Adjustments are doable but can be a bit tricky. 0 Votes

Difficult — Takes time and effort to adjust accurately. 0 Votes

Very difficult — Hard to make precise adjustments without assistance. 0 Votes

Makita LS1016L Pricing

How would you rate the pricing of this miter saw?

Great value for money — Affordable for the performance and features offered. 0 Votes

Pretty good price — Good deal for what you get. 0 Votes

Fair deal — Reasonable price, though there are better options out there. 0 Votes

Kinda pricey — Expensive for the features it offers. 0 Votes

Crazy expensive — Overpriced for the performance and quality. 0 Votes

Guides ¹

Yes, we brought proof.

Files ¹

Download Here (Makita Product Manual)

makitatools.com

3 months ago

Reviews ⁰

The good, the bad, and the brutally honest.

Average Rating

Makita

Makita LS1016L

0 / 5 0 Reviews

Discussions ⁰

Thoughts, takes, and hot debates.

Awards ⁰

Only the best made it here.

Peep the Winners

Collections ⁰

Treasures You’ve picked. No fluff, all fun.

Contributed Users ⁷

Crowdsourced brilliance. Or chaos. You decide.

Thomas Davis

5 Contributions

Richard David Green

4 Contributions

Joanna Vang

2 Contributions

Eric Ryan Martinez

3 Contributions

Matthew Scott Harris

4 Contributions

Wayne Thaxton

2 Contributions

Adam Clark

6 Contributions

More Miter Saws ¹⁹

Unlock more awesome finds.

Miter Saws like Makita LS1016L ¹

62 Points

RYOBI Tools

RYOBI P551

62 Points

RYOBI Tools

RYOBI TSS102L

53 Points

DeWalt

DEWALT DW717

59 Points

DeWalt

DEWALT DWS709

55 Points

Milwaukee

Milwaukee 6955-20

Other Makita Miter Saws ¹⁸

67 Points

Makita

Makita LS1219L

48 Points

Makita

Makita LS1040

70 Points

Makita

Makita LS1219LX

69 Points

Makita

Makita LS1019LX

65 Points

Makita

Makita XSL05Z

User Activities ⁷

All the clicks, all the chaos, all the wisdom.

Adam Clark

Has added a new reaction

3 months ago

Matthew Scott Harris

Has added a new reaction

3 months ago

Wayne Thaxton

Has added a new reaction

3 months ago

Richard David Green

Has added a new reaction

3 months ago

Joanna Vang

Has added a new reaction

3 months ago

Makita

Makita LS1016L

Highlights 103

Why is Makita LS1016L better than other miter saws ?

General Information

Motor & Power

Blade & Cutting System

Cutting Accuracy & Adjustability

Build Material & Durability

Dimensions & Weight

Noise & Vibration

Safety Features

Maintenance & Serviceability

Compatibility & Mounting

Design & Ergonomics

Packaging & Logistics

Comparisons 1

Quick Take

Makita LS1016L

Quick Specs Breakdown

Specifications & Facts 142

General Information 10

Makita LS1016L Intended Use

Makita LS1016L Certification Standards

Makita LS1016L Miter Saw Category

Makita LS1016L Power Source Type

Makita LS1016L Release Year

Makita LS1016L Motor Type

Makita LS1016L Construction Class

Makita LS1016L Country of Manufacture

Makita LS1016L Warranty Length

Makita LS1016L User Skill Level

Motor & Power 18

Makita LS1016L Motor Power

Makita LS1016L

Makita LS1016L No Load Speed

Makita LS1016L

Makita LS1016L Motor Voltage

Makita LS1016L

Makita LS1016L Motor Amperage

Makita LS1016L

Makita LS1016L Electric Brake

Makita LS1016L

Makita LS1016L Maximum Output Torque

Makita LS1016L

Makita LS1016L Cord Length

Makita LS1016L

Makita LS1016L Recommended Generator Size

Makita LS1016L

Makita LS1016L Power Consumption

Makita LS1016L

Makita LS1016L Peak Horsepower

Makita LS1016L

Makita LS1016L Motor Frequency

Makita LS1016L Soft Start

Makita LS1016L Drive Type

Makita LS1016L Battery

Makita LS1016L Charger

Makita LS1016L Thermal Overload Protection

Makita LS1016L Power Indicator Light

Makita LS1016L Restart Protection

Blade & Cutting System 21

Makita LS1016L Blade Speed

Makita LS1016L

Makita LS1016L Blade Material Compatibility

Makita LS1016L Blade Diameter

Makita LS1016L

Makita LS1016L Arbor Size

Makita LS1016L

Makita LS1016L Maximum Crosscut Capacity

Makita LS1016L

Makita LS1016L Maximum Crown Molding Capacity

Makita LS1016L

Makita LS1016L Maximum Nested Crown Capacity

Makita LS1016L

Makita LS1016L Maximum Vertical Cut Capacity

Makita LS1016L Maximum Baseboard Capacity

Makita LS1016L Bevel Direction

Makita LS1016L Maximum Bevel Angle Left

Makita LS1016L Maximum Bevel Angle Right

Makita LS1016L Maximum Miter Angle Left

Makita LS1016L Maximum Miter Angle Right

Highlights ¹⁰³

Comparisons ¹

Specifications & Facts ¹⁴²

General Information ¹⁰

Motor & Power ¹⁸

Blade & Cutting System ²¹

Cutting Accuracy & Adjustability ¹⁶

Build Material & Durability ¹⁶

Dimensions & Weight ¹⁰

Noise & Vibration ⁸